patented WRGP10AH thru wrgp10mh sintered glass passivated junction fast recovery rectifier reverse voltage - 50 to 1000 volts forward current - 1.0 ampere features mechanical data * halogen-free type * gprc (glass passivated rectifier chip) inside * glass passivated cavity-free junction * capable of meeting environmental standards of mil-s-19500 * for use in high frequence rectifier circuits * fast switching for high efficiency * typical ir less than 0.1ua * high temperature soldering guaranteed: 260 o c/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * plastic package has underwriters laboratory flammability classification 94v-0 case : jedec do-204al molded plastic over glass body terminals : tin plated, solderable per mil-std-750, method 2026 polarity : color band denotes cathode end weight : 0.012 ounes , 0.3 gram maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. maximum repetitive peak reverse voltage maximum average forward rectified current 0.375" (9.5mm) lead length (see fig.1) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 1.0 a maximum dc reverse current at rated dc blocking voltage t a =25 o c t a =125 o c t a =150 o c maximum reverse recovery time (note 1) typical junction capacitance (note 2) typical thermal resistance (note 3) operating junction and storage temperature range symbols v rrm i (av) i fsm v f i r trr c j r ja t j ,t stg wrgp10 ah bh dh gh jh jah kh kah mh mah 50 100 200 400 600 600 800 800 1000 1000 1.0 30 1.3 2 30 50 150 250 150 500 300 500 300 15 55 -65 to +175 units volts maximum rms voltage v rms 35 70 140 280 420 420 560 560 700 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 600 800 800 1000 1000 volts volts amps amps ua ns pf o c / w o c notes : (1) reverse recovery test condition : if 0.5a, ir=1.0a, irr=0.25a (2) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (3) thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, p.c.b. mounted. *dimensions in inches and (millimeters) patented patented tm zowie technology corporation rev. 0 do-204al 1.0(25.4) min. 1.0(25.4) min. 0.107(2.70) 0.034(0.86) 0.028(0.71) 0.205(5.20) 0.160(4.10) 0.080(2.00) dia. dia.
ratings and characteristic curves WRGP10AH thru wrgp10mh fig.1 - forward current derating curve fig.3 - typical instantaneous forward characteristics average forward rectified current, amperes 1.50 1.25 1.00 0.75 0.50 0.25 iinstantaneous forward current, amperes 0.10 1.00 10.00 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 0 25 50 75 100 125 150 175 60hz resistive or inductive load pulse width=300us 1% duty cycle ambient temperature, o c instantaneous forward voltage, volts 0.375" (9.5mm) lead length fig.2 - maximum non-repetitive peak forward surge current peak forward surge current, amperes number of cycles at 60hz 8.3ms single half sine-wave (jedec method) 5 10 15 20 25 30 1 10 100 transient thermal impedance( o c/w) 0.1 1 10 100 fig.5 - typical junction capacitance fig.6 - typical transient thermal impedance reverse voltage, volts .1 1 junction capacitance, pf 40 200 .2 .4 1.0 2 4 10 20 40 100 t , pulse duration, sec 100 10 1.0 0.10 0.01 2 4 10 6 20 60 100 zowie technology corporation rev. 0 fig.4 - typical reverse characteristics percent of rated peak reverse voltage,% instantaneous reverse leakage current, microamperes 0.1 0 20 1 10 100 t j = 25 o c t j = 25 o c t j = 125 o c t j = 150 o c 40 60 80 100 110
|
